-
Details
OEM Fork Outer Bushing
-
Details
To perform a quality at home fork service you need to have the right tools. So along with our Fork Service Tool kit you will need a good quality fork seal driver. Some at home installers take some short cuts when installing the fork seals but obviously this a very important part of the service. You want to make sure the seal is seated properly and not damaged. Use the right tool for the job.
-
Details
To perform a quality at home fork service you need to have the right tools. So along with our Fork Service Tool kit you will need a good quality fork seal driver. Some at home installers take some short cuts when installing the fork seals but obviously this a very important part of the service. You want to make sure the seal is seated properly and not damaged. Use the right tool for the job.
-
Details
To perform a quality at home fork service you need to have the right tools. So along with our Fork Service Tool kit you will need a good quality fork seal driver. Some at home installers take some short cuts when installing the fork seals but obviously this a very important part of the service. You want to make sure the seal is seated properly and not damaged. Use the right tool for the job.
-
Details
We have assembled a tool kit consisting of everything special you will need to service almost any cartridge fork you will ever own
-
Details
The Traxxion Dynamics Fork Spring Compressor Kit is an absolute necessity for anyone who intends to service or change springs in an inverted cartridge fork.
-
Details
THe Grom Fork Tube Clamping Tool is required if you are going to disassemble the OEM forks for Damper Upgrades, Spring Upgrades and/or Service.
-
Details
The Grom Hex Tool is required to disassmble the OEM forks for Service, Damper Upgrade, or spring installation.
-
Details
The Traxxion Dynamics Hex Extension Tool is available in 6mm, 8mm, and 10mm sizes, and is used in combination with an ordinary socket and ratchet.
-
Details
The Traxxion Dynamics Hex Extension Tool is available in 6mm, 8mm, and 10mm sizes, and is used in combination with an ordinary socket and ratchet.
-
Details
The Traxxion Dynamics Hex Extension Tool is available in 6mm, 8mm, and 10mm sizes, and is used in combination with an ordinary socket and ratchet.
-
Details
The Hydraulic Spring Perch allows the end coils of the spring to tilt(up to 4 degrees) as compressive loads are applied, and the hydraulic pressure centralizes the load around the centerline of the shock absorber. The result is that up to 96% of the bending load on the shock absorber is emlimated, which increases mid-corner grip.
